home *** CD-ROM | disk | FTP | other *** search
Text File | 1992-08-07 | 168.4 KB | 8,161 lines |
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- cisco MIB*
-
- Sun Nov 19 22:27:19 1989
-
-
- cisco Systems, Inc.
- 1350 Willow Road
- Menlo Park, CA 94025
-
- customer-service@cisco.com
-
-
-
-
- 1. Introduction
-
- This memo describes the variables that are implemented for the
- cisco Systems, Inc. set of products including the Gateway
- Server, Terminal Server, Trouter, and Protocol Translator.
- The document relies upon the Structure of Management
- Information (SMI), RFC1065. It is presented in a format
- similar to the Management Information Base for Network
- Management of TCP/IP-based internets, RFC1066.
-
- This document describes the cisco local Management
- Information Base (MIB) variables for version 8.0 of the system
- software.
-
- 2. Objects
-
- Managed objects defined in this MIB are only accessible by the
- RFC1098 SNMP and are defined using Abstract Syntax Notation
- One (ASN.1).
-
- 2.1. Object Groupings
-
- The SMI enterprises subtree was broken up into pieces so each
- vendor would have a specific location for MIB variables that
- were either proprietary or unique to their products. cisco
- was authorized to use the tree starting with the ASN.1 object
- identifier of 9. The full object identifier path is:
-
-
- *This file is machine generated. Do not edit.
-
-
-
-
-
-
- cisco MIB [Page 1]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- 1.3.6.1.4.1.9
-
-
- The tree below the cisco assigned object identifier is broken
- up into three groups:
-
- - Product names
- - Local variables
- - Temporary variables
-
- The product name space is reserved for naming products which
- require an object identifier from the vendor's specific tree.
- See the RFC1066 MIB variable sysObjectID. The local and
- temporary variables contain objects which can be monitored or
- managed by a network management protocol. The local variable
- space is laid out exactly as specified in RFC1066 as follows:
-
- - Local System
- - Local Interfaces
- - Local Address Translation
- - Local IP
- - Local ICMP
- - Local TCP
- - Local UDP
- - Local EGP
-
- Only the groups which have local variables defined will exist
- in the local variable space.
-
- In addition, the following group was added to provide support
- beyond what RFC1066 provided.
-
- - Local Terminal Server
-
- The temporary variables are defined as a place to hold objects
- whose lifetime may only be a single software release. It
- exists for experimentation purposes and to hold other vendors'
- objects until that vendor may define their own. These
- variables are not guaranteed to be preserved for any length of
- time.
-
- 2.2. Format of Definitions
-
- This section describes the format of each of the objects
- within the cisco local MIB. This format is identical to the
-
-
-
-
-
- cisco MIB [Page 2]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- format used in RFC1066. In fact this entire description was
- shamelessly cribbed from that RFC's section 4.2.
-
- OBJECT:
- -------
- A textual name, termed the OBJECT DESCRIPTOR, for the
- object type, along with its corresponding OBJECT
- IDENTIFIER.
-
- Syntax:
- The abstract syntax for the object type, presented
- using ASN.1. This must resolve to an instance of the
- ASN.1 type ObjectSyntax defined in the SMI.
-
- Definition:
- A textual description of the semantics of the object
- type. Implementations should ensure that their
- interpretation of the object type fulfills this
- definition since this MIB is intended for use in
- multi-vendor environments. As such it is vital that
- object types have consistent meaning across all
- machines.
-
- Access:
- One of read-only, read-write, write-only, or not-
- accessible.
-
- Status:
- One of mandatory, optional, or obsolete.
-
- 3. Object Definitions
-
- CISCO-MIB { iso org(3) dod(6) internet(1) private(4)
- enterprises(1) 9 }
-
- DEFINITIONS ::= BEGIN
-
- IMPORTS
- enterprises, OBJECT-TYPE, NetworkAddress, IpAddress,
- Counter, Gauge, TimeTicks, OBJECT-TYPE
- FROM RFC1065-SMI
-
-
- cisco OBJECT IDENTIFIER ::= { enterprises 9 }
-
-
-
-
-
-
- cisco MIB [Page 3]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- products OBJECT IDENTIFIER ::= { cisco 1 }
- local OBJECT IDENTIFIER ::= { cisco 2 }
- temporary OBJECT IDENTIFIER ::= { cisco 3 }
-
- gateway-server OBJECT IDENTIFIER ::= { products 1 }
- terminal-server OBJECT IDENTIFIER ::= { products 2 }
- trouter OBJECT IDENTIFIER ::= { products 3 }
- protocol-translator OBJECT IDENTIFIER ::= { products 4 }
-
- lsystem OBJECT IDENTIFIER ::= { local 1 }
- linterfaces OBJECT IDENTIFIER ::= { local 2 }
- lat OBJECT IDENTIFIER ::= { local 3 }
- lip OBJECT IDENTIFIER ::= { local 4 }
- licmp OBJECT IDENTIFIER ::= { local 5 }
- ltcp OBJECT IDENTIFIER ::= { local 6 }
- ludp OBJECT IDENTIFIER ::= { local 7 }
- legp OBJECT IDENTIFIER ::= { local 8 }
- lts OBJECT IDENTIFIER ::= { local 9 }
-
- decnet OBJECT IDENTIFIER ::= { temporary 1 }
- xns OBJECT IDENTIFIER ::= { temporary 2 }
- appletalk OBJECT IDENTIFIER ::= { temporary 3 }
- novell OBJECT IDENTIFIER ::= { temporary 4 }
-
- END
-
- 3.1. Product Section
-
- The product section contains the different product's object
- identifiers. Each product has a unique object identifier
- allocated from this section which is referenced by the
- sysObjectID variable from RFC1066.
-
- Gateway-Server OBJECT IDENTIFIER ::= { products 1 }
- Terminal-Server OBJECT IDENTIFIER ::= { products 2 }
- TRouter OBJECT IDENTIFIER ::= { products 3 }
- Protocol-Translator OBJECT IDENTIFIER ::= { products 4 }
-
- New products will be added at the end of this list.
-
- 3.2. Local Variable Section
-
- This section describes the local variables within the cisco
- product line. Groups may or may not be present depending on
- the software options present in the managed device.
-
-
-
-
-
- cisco MIB [Page 4]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- 3.2.1. Local System Group
-
- This group is present in all products.
-
- OBJECT:
- -------
- romId { lsystem 1 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- This variable contains a printable octet string
- which contains the System Bootstrap description and
- version identification.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- whyReload { lsystem 2 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- This variable contains a printable octet string
- which contains the reason why the system was last
- restarted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- hostName { lsystem 3 }
-
-
-
-
-
- cisco MIB [Page 5]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- OCTET STRING
-
- Definition:
- This variable represents the name of the host in
- printable ascii characters.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- domainName { lsystem 4 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- This variable is the domain portion of the domain
- name of the host.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- authAddr { lsystem 5 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- This variable contains the last SNMP authorization
- failure IP address.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 6]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bootHost { lsystem 6 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- Contains the IP address of the host that supplied
- the currently running software.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- ping { lsystem 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Supplies a way to ping a host from this entity.
-
- Access:
- read-write.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- freeMem { lsystem 8 }
-
- Syntax:
- INTEGER
-
-
-
-
-
- cisco MIB [Page 7]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Return the amount of free memory in bytes.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferElFree { lsystem 9 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of free buffer elements.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferElMax { lsystem 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the maximum number of buffer elements.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 8]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- bufferElHit { lsystem 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of buffer element hits.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferElMiss { lsystem 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of buffer element misses.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferElCreate { lsystem 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of buffer element creates.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 9]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmSize { lsystem 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the size of small buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmTotal { lsystem 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the total number of small buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmFree { lsystem 16 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 10]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Contains the number of free small buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmMax { lsystem 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the maximum number of small buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmHit { lsystem 18 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of small buffer hits.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 11]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- bufferSmMiss { lsystem 19 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of small buffer misses.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmTrim { lsystem 20 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of small buffer trims.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferSmCreate { lsystem 21 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of small buffer creates.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 12]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdSize { lsystem 22 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the size of medium buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdTotal { lsystem 23 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the total number of medium buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdFree { lsystem 24 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 13]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Contains the number of free medium buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdMax { lsystem 25 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the maximum number of medium buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdHit { lsystem 26 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of medium buffer hits.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 14]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- bufferMdMiss { lsystem 27 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of medium buffer misses.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdTrim { lsystem 28 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of medium buffer trims.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferMdCreate { lsystem 29 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of medium buffer creates.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 15]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgSize { lsystem 30 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the size of big buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgTotal { lsystem 31 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the total number of big buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgFree { lsystem 32 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 16]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Contains the number of free big buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgMax { lsystem 33 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the maximum number of big buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgHit { lsystem 34 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of big buffer hits.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 17]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- bufferBgMiss { lsystem 35 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of big buffer misses.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgTrim { lsystem 36 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of big buffer trims.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferBgCreate { lsystem 37 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of big buffer creates.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 18]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgSize { lsystem 38 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the size of large buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgTotal { lsystem 39 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the total number of large buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgFree { lsystem 40 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 19]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Contains the number of free large buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgMax { lsystem 41 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the maximum number of large buffers.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgHit { lsystem 42 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of large buffer hits.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 20]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- bufferLgMiss { lsystem 43 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of large buffer misses.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgTrim { lsystem 44 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of large buffer trims.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferLgCreate { lsystem 45 }
-
- Syntax:
- INTEGER
-
- Definition:
- Contains the number of large buffer creates.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 21]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferFail { lsystem 46 }
-
- Syntax:
- INTEGER
-
- Definition:
- Count of the number of buffer allocation failures.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- bufferNoMem { lsystem 47 }
-
- Syntax:
- INTEGER
-
- Definition:
- Count of the number of buffer create failures due to
- no free memory.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- netConfigIP { lsystem 48 }
-
- Syntax:
- NetworkAddress
-
-
-
-
-
- cisco MIB [Page 22]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Holds the IP address of the host that supplied the
- network-confg file.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- netConfigName { lsystem 49 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Holds the name of the network configuration file.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- netConfigSet { lsystem 50 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Permit the loading of a new network-confg file.
-
- Access:
- read-write.
-
- Status:
- mandatory.
-
-
-
-
-
-
-
- cisco MIB [Page 23]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- hostConfigIP { lsystem 51 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- Contains the IP address of the host that provided
- the host-config file.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- hostConfigName { lsystem 52 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Contains the name of the last configured host-confg
- file.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- hostConfigSet { lsystem 53 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Permit the loading of a new host-confg file.
-
-
-
-
-
- cisco MIB [Page 24]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-write.
-
- Status:
- mandatory.
-
-
- 3.2.2. Local Interface Group
-
- This group is present in all products.
-
- 3.2.2.1. Local Interface Table
-
- This group provides additional objects to the table defined by
- RFC1066.
-
- OBJECT:
- -------
- lifTable { linterfaces 1 }
-
- Syntax:
- SEQUENCE OF LIfEntry
-
- Definition:
- A list of interface entries.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- OBJECT:
- lifEntry { lifTable 1 }
-
- Syntax:
- LIfEntry ::= SEQUENCE {
- locIfHardType
- OCTET STRING,
- locIfLineProt
- INTEGER,
- locIfLastIn
- INTEGER,
- locIfLastOut
-
-
-
-
-
- cisco MIB [Page 25]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER,
- locIfLastOutHang
- INTEGER,
- locIfInBitsSec
- INTEGER,
- locIfInPktsSec
- INTEGER,
- locIfOutBitsSec
- INTEGER,
- locIfOutPktsSec
- INTEGER,
- locIfInRunts
- INTEGER,
- locIfInGiants
- INTEGER,
- locIfInCRC
- INTEGER,
- locIfInFrame
- INTEGER,
- locIfInOverrun
- INTEGER,
- locIfInIgnored
- INTEGER,
- locIfInAbort
- INTEGER,
- locIfResets
- INTEGER,
- locIfRestarts
- INTEGER,
- locIfKeep
- INTEGER,
- locIfReason
- OCTET STRING,
- }
-
- Definition:
- A collection of additional objects in the cisco
- interface.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
-
-
-
-
- cisco MIB [Page 26]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- locIfHardType { lifEntry 1 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Return the type of interface in printable ascii.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfLineProt { lifEntry 2 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether interface line protocol is up or
- not.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfLastIn { lifEntry 3 }
-
- Syntax:
- INTEGER
-
- Definition:
-
-
-
-
-
- cisco MIB [Page 27]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Elapsed time since last successful protocol input
- packet was received.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfLastOut { lifEntry 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Elapsed time since last successful protocol output
- was was transmitted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfLastOutHang { lifEntry 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Elapsed time since last protocol output packet could
- not be uccessfully transmited.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
-
-
-
-
- cisco MIB [Page 28]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- locIfInBitsSec { lifEntry 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Five minute average of input bits per second.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInPktsSec { lifEntry 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Five minute average of input packets per second.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfOutBitsSec { lifEntry 8 }
-
- Syntax:
- INTEGER
-
- Definition:
- Five minute average of output bits per second.
-
- Access:
-
-
-
-
-
- cisco MIB [Page 29]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfOutPktsSec { lifEntry 9 }
-
- Syntax:
- INTEGER
-
- Definition:
- Five minute average of output packets per second.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInRunts { lifEntry 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of packets input which were smaller then the
- allowable physical edia permitted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInGiants { lifEntry 11 }
-
-
-
-
-
-
- cisco MIB [Page 30]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- INTEGER
-
- Definition:
- Number of input packets which were larger then the
- physical media ermitted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInCRC { lifEntry 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of input packets which had cyclic redundancy
- checksum errors.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInFrame { lifEntry 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of input packet which were misaligned.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 31]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInOverrun { lifEntry 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Count of input which arrived too quickly for the to
- hardware receive.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInIgnored { lifEntry 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of input packets which were simply ignored by
- this interface.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfInAbort { lifEntry 16 }
-
- Syntax:
-
-
-
-
-
- cisco MIB [Page 32]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER
-
- Definition:
- Number of input packets which were aborted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfResets { lifEntry 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of times the interface internally reset.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfRestarts { lifEntry 18 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of time interface needed to be completely
- restarted.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
-
-
-
- cisco MIB [Page 33]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- locIfKeep { lifEntry 19 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether keepalives are enabled on this
- interface.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIfReason { lifEntry 20 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Printable ascii reason for interface last status
- change.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- 3.2.3. Local IP Group
-
- This group is present in all products which are using the IP
- protocol.
-
- 3.2.3.1. Local IP Address Table
-
- This group provides additional objects to the table defined by
- RFC1066.
-
-
-
-
-
- cisco MIB [Page 34]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- lipAddrTable { lip 1 }
-
- Syntax:
- SEQUENCE OF LIpAddrEntry
-
- Definition:
- A list of IP address entries.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- OBJECT:
- lipAddrEntry { lipAddrTable 1 }
-
- Syntax:
- LIpAddrEntry ::= SEQUENCE {
- locIPHow
- OCTET STRING,
- locIPWho
- NetworkAddress,
- locIPHelper
- NetworkAddress,
- locIPSecurity
- INTEGER,
- locIPRedirects
- INTEGER,
- locIPUnreach
- INTEGER,
- }
-
- Definition:
- A collection of additional objects in the cisco IP
- implementation.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
-
-
-
- cisco MIB [Page 35]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- locIPHow { lipAddrEntry 1 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Printable ascii method of how this interface
- obtained its IP address.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIPWho { lipAddrEntry 2 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- IP address of who supplied this interface its IP
- address.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIPHelper { lipAddrEntry 3 }
-
- Syntax:
- NetworkAddress
-
-
-
-
-
-
- cisco MIB [Page 36]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- IP helper address for broadcast forwarding support.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIPSecurity { lipAddrEntry 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- IP security level. See RFCXXX.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locIPRedirects { lipAddrEntry 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether ICMP redirects will be sent or not.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 37]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- locIPUnreach { lipAddrEntry 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether ICMP unreachables will be sent or
- not.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- 3.2.3.2. Local IP Routing Table
-
- This group provides additional objects to the table defined by
- RFC1066.
-
- OBJECT:
- -------
- lipRoutingTable { lip 2 }
-
- Syntax:
- SEQUENCE OF LIpRouteEntry
-
- Definition:
- A list of IP routing entries.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- OBJECT:
- lipRouteEntry { lipRoutingTable 1 }
-
- Syntax:
- LIpRouteEntry ::= SEQUENCE {
- locRtMask
-
-
-
-
-
- cisco MIB [Page 38]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- NetworkAddress,
- locRtCount
- INTEGER,
- locRtUses
- INTEGER,
- }
-
- Definition:
- A collection of additional objects in the cisco IP
- routing implementation.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- locRtMask { lipRouteEntry 1 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- Routing table network mask.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locRtCount { lipRouteEntry 2 }
-
- Syntax:
- INTEGER
-
- Definition:
-
-
-
-
-
- cisco MIB [Page 39]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Number of parallel routes within routing table.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- locRtUses { lipRouteEntry 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of times this route was used in a forward
- operation.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- routeFilter { lip 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- A simple routing filter used for testing.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 40]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- actThresh { lip 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Threshold of IP accounting records in use before IP
- traffic will be iscarded.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- actLostPkts { lip 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Lost IP packets due to memory limitations.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- actLostByts { lip 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total bytes of lost IP packets.
-
- Access:
-
-
-
-
-
- cisco MIB [Page 41]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- read-only.
-
- Status:
- mandatory.
-
-
- 3.2.3.3. Local IP Accounting Table
-
- This group provides access to the cisco IP accounting support.
-
- OBJECT:
- -------
- lipAccountingTable { lip 7 }
-
- Syntax:
- SEQUENCE OF LIpAccountEntry
-
- Definition:
- A list of IP accounting entries.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- OBJECT:
- lipAccountEntry { lipAccountingTable 1 }
-
- Syntax:
- LIpAccountEntry ::= SEQUENCE {
- actSrc
- NetworkAddress,
- actDst
- NetworkAddress,
- actPkts
- INTEGER,
- actByts
- INTEGER,
- }
-
- Definition:
- A collection of objects necessary for IP accounting.
-
-
-
-
-
-
- cisco MIB [Page 42]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- actSrc { lipAccountEntry 1 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- IP Source address for host traffic matrix.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- actDst { lipAccountEntry 2 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- IP Destination address for host traffic matrix.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
-
-
-
-
-
- cisco MIB [Page 43]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- actPkts { lipAccountEntry 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of IP packets sent from source to
- destination.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- actByts { lipAccountEntry 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of bytes in IP packets from source to
- destination.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- 3.2.4. Local TCP Group
-
- This group is present in all products which are using the TCP
- protocol.
-
- 3.2.4.1. Local TCP Connection Table
-
- This group provides additional objects to the table defined by
- RFC1066.
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 44]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- ltcpConnTable { ltcp 1 }
-
- Syntax:
- SEQUENCE OF LTcpConnEntry
-
- Definition:
- A list of TCP connection entries.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
- OBJECT:
- ltcpConnEntry { ltcpConnTable 1 }
-
- Syntax:
- LTcpConnEntry ::= SEQUENCE {
- loctcpConnInBytes
- INTEGER,
- loctcpConnOutBytes
- INTEGER,
- loctcpConnInPkts
- INTEGER,
- loctcpConnOutPkts
- INTEGER,
- loctcpConnElapsed
- TimeTicks,
- }
-
- Definition:
- A collection of additional objects in the cisco TCP
- implementation.
-
- Access:
- not-accessible.
-
- Status:
- mandatory.
-
-
-
-
-
-
-
-
- cisco MIB [Page 45]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- loctcpConnInBytes { ltcpConnEntry 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Bytes input for this TCP connection.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- loctcpConnOutBytes { ltcpConnEntry 2 }
-
- Syntax:
- INTEGER
-
- Definition:
- Bytes output for this TCP connection.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- loctcpConnInPkts { ltcpConnEntry 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Packets input for this TCP connection.
-
-
-
-
-
- cisco MIB [Page 46]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- loctcpConnOutPkts { ltcpConnEntry 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Packets output for this TCP connection.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- OBJECT:
- -------
- loctcpConnElapsed { ltcpConnEntry 5 }
-
- Syntax:
- TimeTicks
-
- Definition:
- How long this TCP connection has been established.
-
- Access:
- read-only.
-
- Status:
- mandatory.
-
-
- 3.2.5. Local cisco Terminal Server Group
-
- This group is present in all products which contain
- asynchronous terminal lines.
-
-
-
-
-
- cisco MIB [Page 47]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- tsLines { lts 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of physical lines on this device.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- 3.2.5.1. Local Terminal Server Line Table
-
- This group contains terminal server specific information on a
- per line basis.
-
- OBJECT:
- -------
- ltsLineTable { lts 2 }
-
- Syntax:
- SEQUENCE OF LTsLineEntry
-
- Definition:
- A list of terminal server line entries.
-
- Access:
- not-accessible.
-
- Status:
- optional.
-
-
- OBJECT:
- ltsLineEntry { ltsLineTable 1 }
-
- Syntax:
- LTsLineEntry ::= SEQUENCE {
- tsLineActive
-
-
-
-
-
- cisco MIB [Page 48]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER,
- tsLineType
- INTEGER,
- tsLineAutobaud
- INTEGER,
- tsLineSpeedin
- INTEGER,
- tsLineSpeedout
- INTEGER,
- tsLineFlow
- INTEGER,
- tsLineModem
- INTEGER,
- tsLineLoc
- OCTET STRING,
- tsLineTerm
- OCTET STRING,
- tsLineScrlen
- INTEGER,
- tsLineScrwid
- INTEGER,
- tsLineEsc
- OCTET STRING,
- tsLineTmo
- INTEGER,
- tsLineSestmo
- INTEGER,
- tsLineRotary
- INTEGER,
- tsLineUses
- INTEGER,
- tsLineNses
- INTEGER,
- tsLineUser
- OCTET STRING,
- }
-
- Definition:
- A collection of per TTY objects in the cisco
- Terminal Server implementation.
-
- Access:
- not-accessible.
-
- Status:
-
-
-
-
-
- cisco MIB [Page 49]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- optional.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- tsLineActive { ltsLineEntry 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether this line is active or not.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineType { ltsLineEntry 2 }
-
- Syntax:
- INTEGER {
- unknown(1),
- console(2),
- terminal(3),
- line-printer(4),
- virtual-terminal(5),
- auxiliary(6)
- }
-
- Definition:
- Type of line.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
-
-
-
-
- cisco MIB [Page 50]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- tsLineAutobaud { ltsLineEntry 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether line will autobaud or not.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineSpeedin { ltsLineEntry 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- What input speed the line is running at.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineSpeedout { ltsLineEntry 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- What output speed the line is running at.
-
- Access:
-
-
-
-
-
- cisco MIB [Page 51]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineFlow { ltsLineEntry 6 }
-
- Syntax:
- INTEGER {
- unknown(1),
- none(2),
- software-input(3),
- software-output(4),
- software-both(5),
- hardware-input(6),
- hardware-output(7),
- hardware-both(8)
- }
-
- Definition:
- What kind of flow control the line is using.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineModem { ltsLineEntry 7 }
-
- Syntax:
- INTEGER {
- unknown(1),
- none(2),
- call-in(3),
- call-out(4),
- cts-required(5),
- rs-is-cd(6)
- }
-
-
-
-
-
- cisco MIB [Page 52]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- What kind of modem control the line is using.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineLoc { ltsLineEntry 8 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Printable ascii string which describes the line's
- physical location.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineTerm { ltsLineEntry 9 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Printable ascii string which describes the line's
- terminal type.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
-
-
-
-
- cisco MIB [Page 53]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- tsLineScrlen { ltsLineEntry 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Length in lines of the screen of terminal attached
- to this line.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineScrwid { ltsLineEntry 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Width in characters of the screen of terminal
- attached to this line.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineEsc { ltsLineEntry 12 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Escape character used to break out of active
-
-
-
-
-
- cisco MIB [Page 54]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- sessions.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineTmo { ltsLineEntry 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Line idleness timeout in seconds.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineSestmo { ltsLineEntry 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Session idleness timeout in second.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
-
-
-
-
-
- cisco MIB [Page 55]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- tsLineRotary { ltsLineEntry 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Rotary group number the line belongs in.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineUses { ltsLineEntry 16 }
-
- Syntax:
- INTEGER
-
- Definition:
- Number of times this line was been activated.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineNses { ltsLineEntry 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Current number of sessions in use on this line.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 56]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tsLineUser { ltsLineEntry 18 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- TACACS user name, if TACACS enabled, of user on this
- line.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- 3.2.5.2. Local Terminal Server Line Session Table
-
- This group contains terminal server specific information on a
- per line and session basis.
-
- OBJECT:
- -------
- ltsLineSessionTable { lts 3 }
-
- Syntax:
- SEQUENCE OF LTsLineSessionEntry
-
- Definition:
- A list of terminal server line and session entries.
-
- Access:
- not-accessible.
-
- Status:
- optional.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 57]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ltsLineSessionEntry { ltsLineSessionTable 1 }
-
- Syntax:
- LTsLineSessionEntry ::= SEQUENCE {
- tslineSesType
- INTEGER,
- tslineSesDir
- INTEGER,
- tslineSesAddr
- NetworkAddress,
- tslineSesName
- OCTET STRING,
- tslineSesCur
- INTEGER,
- tslineSesIdle
- INTEGER,
- }
-
- Definition:
- A collection of per session and per TTY objects in
- the cisco Terminal Server implementation.
-
- Access:
- not-accessible.
-
- Status:
- optional.
-
-
- The following section describes the components of the table.
-
- OBJECT:
- -------
- tslineSesType { ltsLineSessionEntry 1 }
-
- Syntax:
- INTEGER {
- unknown(1),
- pad(2),
- stream(3),
- rlogin(4),
- telnet(5)
- }
-
- Definition:
-
-
-
-
-
- cisco MIB [Page 58]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Type of session.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tslineSesDir { ltsLineSessionEntry 2 }
-
- Syntax:
- INTEGER {
- unknown(1),
- incoming(2),
- outgoing(3)
- }
-
- Definition:
- Direction of session.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tslineSesAddr { ltsLineSessionEntry 3 }
-
- Syntax:
- NetworkAddress
-
- Definition:
- Remote host address of session. [What about PAD
- connections?]
-
- Access:
- read-only.
-
- Status:
-
-
-
-
-
- cisco MIB [Page 59]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- optional.
-
-
- OBJECT:
- -------
- tslineSesName { ltsLineSessionEntry 4 }
-
- Syntax:
- OCTET STRING
-
- Definition:
- Remote host name of session.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tslineSesCur { ltsLineSessionEntry 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Boolean whether session is the currently active one.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- OBJECT:
- -------
- tslineSesIdle { ltsLineSessionEntry 6 }
-
- Syntax:
- INTEGER
-
- Definition:
-
-
-
-
-
- cisco MIB [Page 60]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Time in seconds session has been idle.
-
- Access:
- read-only.
-
- Status:
- optional.
-
-
- 3.3. Temporary Variable Section
-
- This section is equivalent to the experimental space defined
- by the SMI. It contains variables that are useful to have but
- are beyond cisco's ability to control and maintain. This
- section can change from release to release without warning.
- This document controls what is contained here for this
- version.
-
- 3.3.1. Temporary DECNET Section
-
- This group is present in all router based products.
-
- OBJECT:
- -------
- dnForward { decnet 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of DECNET packets forwarded.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnReceived { decnet 2 }
-
- Syntax:
- INTEGER
-
-
-
-
-
- cisco MIB [Page 61]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Count of total DECNET packets received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnFormaterr { decnet 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of DECNET packets received with header
- errors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNotgateway { decnet 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of packets received while not routing.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
-
-
- cisco MIB [Page 62]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- dnNotimp { decnet 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of received unknown control packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnHellos { decnet 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Hellos received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnBadhello { decnet 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of received bad Hellos.
-
- Access:
-
-
-
-
-
- cisco MIB [Page 63]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNotlong { decnet 8 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of received packets not in long format.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnDatas { decnet 9 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of received data packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnBigaddr { decnet 10 }
-
- Syntax:
-
-
-
-
-
- cisco MIB [Page 64]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER
-
- Definition:
- Total number of too large addresses.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNoroute { decnet 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of packets dropped due to no route
- present.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNoencap { decnet 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of packets dropped due to output
- encapsulation failure.
-
- Access:
- read-only.
-
- Status:
-
-
-
-
-
- cisco MIB [Page 65]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- experimental.
-
-
- OBJECT:
- -------
- dnLevel1s { decnet 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Level 1 routing packets received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnBadlevel1 { decnet 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of bad Level 1 routing packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnToomanyhops { decnet 15 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 66]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Total number of packets received which cisited too
- many nodes.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnHellosent { decnet 16 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total numver of Hellos output.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnLevel1sent { decnet 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Level 1 routing packets sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
-
-
- cisco MIB [Page 67]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- dnNomemory { decnet 18 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of memory requests denied.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnOtherhello { decnet 19 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Hellos received from another area.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnOtherlevel1 { decnet 20 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Level 1 routing packets received
- from another area.
-
-
-
-
-
-
- cisco MIB [Page 68]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnLevel2s { decnet 21 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Level 2 routing packets received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnLevel2sent { decnet 22 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of Level 2 routing packets sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNovector { decnet 23 }
-
-
-
-
-
-
- cisco MIB [Page 69]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of missing routing vectors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnOtherlevel2 { decnet 24 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of received Level 2 routing packets
- from another area.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- dnNoaccess { decnet 25 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of packets dropped due to access
- control failure.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 70]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- experimental.
-
-
- 3.3.2. Temporary XNS Section
-
- This group is present in all router based products.
-
- OBJECT:
- -------
- xnsInput { xns 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total input count of number of XNS packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsLocal { xns 2 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of XNS input packets for this host.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsBcastin { xns 3 }
-
-
-
-
-
- cisco MIB [Page 71]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS input broadcast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsForward { xns 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS packets forwarded.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsBcastout { xns 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS output broadcast
- packets.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 72]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsErrin { xns 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Error input packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsErrout { xns 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Error output packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsFormerr { xns 8 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 73]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Total count of number of XNS input packets with
- header errors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsChksum { xns 9 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS input packets with
- checksum erors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsNotgate { xns 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS input packets received
- while not routing.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
- cisco MIB [Page 74]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- xnsHopcnt { xns 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS input packets that have
- exceeded the maximum hop count.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsNoroute { xns 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS packets dropped due to
- no route.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsNoencap { xns 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS packets dropped due to
-
-
-
-
-
- cisco MIB [Page 75]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- output encapsulation failed.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsOutput { xns 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS output packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsInmult { xns 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS input multicast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 76]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- xnsUnknown { xns 16 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of unknown XNS input packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsFwdbrd { xns 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS broadcast packets
- forwarded.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsEchoreqin { xns 18 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Echo request packets
- received.
-
-
-
-
-
-
- cisco MIB [Page 77]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsEchoreqout { xns 19 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Echo request packets
- sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- xnsEchorepin { xns 20 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Echo reply packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
-
-
-
-
-
- cisco MIB [Page 78]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- xnsEchorepout { xns 21 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of XNS Echo reply packets
- sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- 3.3.3. Temporary AppleTalk Section
-
- This group is present in all router based products.
-
- OBJECT:
- -------
- atInput { appletalk 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total input count of number of AppleTalk packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atLocal { appletalk 2 }
-
- Syntax:
- INTEGER
-
- Definition:
-
-
-
-
-
- cisco MIB [Page 79]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Total count of AppleTalk input packets for this
- host.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atBcastin { appletalk 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk input broadcast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atForward { appletalk 4 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk packets
- forwarded.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
-
- cisco MIB [Page 80]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- atBcastout { appletalk 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk output broadcast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atFormerr { appletalk 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk input packets
- with header errors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atChksum { appletalk 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk input packets
-
-
-
-
-
- cisco MIB [Page 81]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- with checksum erors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNotgate { appletalk 8 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of AppleTalk input packets received
- while not routing.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atHopcnt { appletalk 9 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk input packets
- that have exceeded the maximum hop count.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
-
-
- cisco MIB [Page 82]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- atNoaccess { appletalk 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total number of AppleTalk packets dropped due to
- access control.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNoroute { appletalk 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk packets dropped
- due to no route.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNoencap { appletalk 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk packets dropped
-
-
-
-
-
- cisco MIB [Page 83]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- due to output encapsulation failed.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atOutput { appletalk 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk output packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atInmult { appletalk 14 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk input multicast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
-
-
-
-
-
- cisco MIB [Page 84]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- -------
- atRtmpin { appletalk 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk RTMP packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atRtmpout { appletalk 16 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk RTMP packets
- sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNbpin { appletalk 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk NBP packets
- received.
-
-
-
-
-
- cisco MIB [Page 85]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNbpout { appletalk 18 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk NBP packets sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atAtp { appletalk 19 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk ATP packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atZipin { appletalk 20 }
-
-
-
-
-
- cisco MIB [Page 86]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk ZIP packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atZipout { appletalk 21 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk ZIP packets sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atEcho { appletalk 22 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk Echo packets
- received.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 87]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atEchoill { appletalk 23 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of illegal AppleTalk Echo
- packets received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atDdpshort { appletalk 24 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of short AppleTalk DDP packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atDdplong { appletalk 25 }
-
- Syntax:
-
-
-
-
-
- cisco MIB [Page 88]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER
-
- Definition:
- Total count of number of long AppleTalk DDP packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atDdpbad { appletalk 26 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of illegal sized AppleTalk DDP
- packets received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atNobuffer { appletalk 27 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk packets lost due
- to no memory.
-
- Access:
- read-only.
-
-
-
-
-
-
- cisco MIB [Page 89]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atArpreq { appletalk 28 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of input AppleTalk ARP request
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atArpreply { appletalk 29 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of AppleTalk ARP reply packets
- output.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atArpprobe { appletalk 30 }
-
- Syntax:
-
-
-
-
-
- cisco MIB [Page 90]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER
-
- Definition:
- Total count of number of input AppleTalk ARP probe
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- atUnknown { appletalk 31 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of unknown AppleTalk input
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- 3.3.4. Temporary Novell Section
-
- This group is present in all router based products.
-
- OBJECT:
- -------
- novellInput { novell 1 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total input count of number of NOVELL packets.
-
-
-
-
-
-
- cisco MIB [Page 91]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellBcastin { novell 2 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL input broadcast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellForward { novell 3 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL packets forwarded.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellBcastout { novell 4 }
-
-
-
-
-
- cisco MIB [Page 92]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL output broadcast
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellFormerr { novell 5 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL input packets with
- header errors.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellChksum { novell 6 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL input packets with
- checksum erors.
-
- Access:
- read-only.
-
-
-
-
-
- cisco MIB [Page 93]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellHopcnt { novell 7 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL input packets that
- have exceeded the maximum hop count.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellNoroute { novell 8 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL packets dropped due
- to no route.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellNoencap { novell 9 }
-
- Syntax:
-
-
-
-
-
- cisco MIB [Page 94]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- INTEGER
-
- Definition:
- Total count of number of NOVELL packets dropped due
- to output encapsulation failed.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellOutput { novell 10 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL output packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellInmult { novell 11 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL input multicast
- packets.
-
- Access:
- read-only.
-
- Status:
-
-
-
-
-
- cisco MIB [Page 95]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- experimental.
-
-
- OBJECT:
- -------
- novellLocal { novell 12 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of NOVELL input packets for this host.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellUnknown { novell 13 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of unknown NOVELL input
- packets.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellSapreqin { novell 14 }
-
- Syntax:
- INTEGER
-
-
-
-
-
-
- cisco MIB [Page 96]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Definition:
- Total count of number of NOVELL SAP request packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellSapresin { novell 15 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL SAP response packets
- received.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- OBJECT:
- -------
- novellSapout { novell 16 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL SAP request packets
- sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
-
-
-
- cisco MIB [Page 97]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- OBJECT:
- -------
- novellSapreply { novell 17 }
-
- Syntax:
- INTEGER
-
- Definition:
- Total count of number of NOVELL SAP reply packets
- sent.
-
- Access:
- read-only.
-
- Status:
- experimental.
-
-
- 4. Definitions
-
- CISCO-MIB { iso org(3) dod(6) internet(1) private(4)
- enterprises(1) 9 }
-
- DEFINITIONS ::= BEGIN
-
- IMPORTS
- enterprises, OBJECT-TYPE, NetworkAddress, IpAddress,
- Counter, Gauge, TimeTicks, OBJECT-TYPE
- FROM RFC1065-SMI
-
-
- cisco OBJECT IDENTIFIER ::= { enterprises 9 }
-
- products OBJECT IDENTIFIER ::= { cisco 1 }
- local OBJECT IDENTIFIER ::= { cisco 2 }
- temporary OBJECT IDENTIFIER ::= { cisco 3 }
-
- gateway-server OBJECT IDENTIFIER ::= { products 1 }
- terminal-server OBJECT IDENTIFIER ::= { products 2 }
- trouter OBJECT IDENTIFIER ::= { products 3 }
- protocol-translator OBJECT IDENTIFIER ::= { products 4 }
-
- lsystem OBJECT IDENTIFIER ::= { local 1 }
- linterfaces OBJECT IDENTIFIER ::= { local 2 }
- lat OBJECT IDENTIFIER ::= { local 3 }
-
-
-
-
-
- cisco MIB [Page 98]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- lip OBJECT IDENTIFIER ::= { local 4 }
- licmp OBJECT IDENTIFIER ::= { local 5 }
- ltcp OBJECT IDENTIFIER ::= { local 6 }
- ludp OBJECT IDENTIFIER ::= { local 7 }
- legp OBJECT IDENTIFIER ::= { local 8 }
- lts OBJECT IDENTIFIER ::= { local 9 }
-
- decnet OBJECT IDENTIFIER ::= { temporary 1 }
- xns OBJECT IDENTIFIER ::= { temporary 2 }
- appletalk OBJECT IDENTIFIER ::= { temporary 3 }
- novell OBJECT IDENTIFIER ::= { temporary 4 }
-
- -- the Local System group
-
- romId OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 1 }
-
- whyReload OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 2 }
-
- hostName OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 3 }
-
- domainName OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 4 }
-
- authAddr OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 5 }
-
- bootHost OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 99]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 6 }
-
- ping OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- ::= { lsystem 7 }
-
- freeMem OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 8 }
-
- bufferElFree OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 9 }
-
- bufferElMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 10 }
-
- bufferElHit OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 11 }
-
- bufferElMiss OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 12 }
-
- bufferElCreate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
-
-
-
-
-
- cisco MIB [Page 100]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ::= { lsystem 13 }
-
- bufferSmSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 14 }
-
- bufferSmTotal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 15 }
-
- bufferSmFree OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 16 }
-
- bufferSmMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 17 }
-
- bufferSmHit OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 18 }
-
- bufferSmMiss OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 19 }
-
- bufferSmTrim OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 20 }
-
- bufferSmCreate OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 101]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 21 }
-
- bufferMdSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 22 }
-
- bufferMdTotal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 23 }
-
- bufferMdFree OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 24 }
-
- bufferMdMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 25 }
-
- bufferMdHit OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 26 }
-
- bufferMdMiss OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 27 }
-
- bufferMdTrim OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
-
-
-
-
-
- cisco MIB [Page 102]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ::= { lsystem 28 }
-
- bufferMdCreate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 29 }
-
- bufferBgSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 30 }
-
- bufferBgTotal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 31 }
-
- bufferBgFree OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 32 }
-
- bufferBgMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 33 }
-
- bufferBgHit OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 34 }
-
- bufferBgMiss OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 35 }
-
- bufferBgTrim OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 103]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 36 }
-
- bufferBgCreate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 37 }
-
- bufferLgSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 38 }
-
- bufferLgTotal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 39 }
-
- bufferLgFree OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 40 }
-
- bufferLgMax OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 41 }
-
- bufferLgHit OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 42 }
-
- bufferLgMiss OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
-
-
-
-
-
- cisco MIB [Page 104]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ::= { lsystem 43 }
-
- bufferLgTrim OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 44 }
-
- bufferLgCreate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 45 }
-
- bufferFail OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 46 }
-
- bufferNoMem OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 47 }
-
- netConfigIP OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 48 }
-
- netConfigName OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 49 }
-
- netConfigSet OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- ::= { lsystem 50 }
-
- hostConfigIP OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 105]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 51 }
-
- hostConfigName OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lsystem 52 }
-
- hostConfigSet OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- ::= { lsystem 53 }
- -- the Local Interfaces group
-
- -- the Local Interface Table
-
- lifTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LIfEntry
- ACCESS read-only
- STATUS mandatory
- ::= { linterfaces 1 }
-
- lifEntry OBJECT-TYPE
- SYNTAX LIfEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lifTable 1 }
-
- LIfEntry ::= SEQUENCE {
- locIfHardType
- OCTET STRING,
- locIfLineProt
- INTEGER,
- locIfLastIn
- INTEGER,
- locIfLastOut
- INTEGER,
- locIfLastOutHang
- INTEGER,
- locIfInBitsSec
- INTEGER,
-
-
-
-
-
- cisco MIB [Page 106]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- locIfInPktsSec
- INTEGER,
- locIfOutBitsSec
- INTEGER,
- locIfOutPktsSec
- INTEGER,
- locIfInRunts
- INTEGER,
- locIfInGiants
- INTEGER,
- locIfInCRC
- INTEGER,
- locIfInFrame
- INTEGER,
- locIfInOverrun
- INTEGER,
- locIfInIgnored
- INTEGER,
- locIfInAbort
- INTEGER,
- locIfResets
- INTEGER,
- locIfRestarts
- INTEGER,
- locIfKeep
- INTEGER,
- locIfReason
- OCTET STRING,
- }
-
- locIfHardType OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 1 }
-
- locIfLineProt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 2 }
-
- locIfLastIn OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 107]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS mandatory
- ::= { lifEntry 3 }
-
- locIfLastOut OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 4 }
-
- locIfLastOutHang OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 5 }
-
- locIfInBitsSec OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 6 }
-
- locIfInPktsSec OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 7 }
-
- locIfOutBitsSec OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 8 }
-
- locIfOutPktsSec OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 9 }
-
- locIfInRunts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 10 }
-
-
-
-
-
-
- cisco MIB [Page 108]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- locIfInGiants OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 11 }
-
- locIfInCRC OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 12 }
-
- locIfInFrame OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 13 }
-
- locIfInOverrun OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 14 }
-
- locIfInIgnored OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 15 }
-
- locIfInAbort OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 16 }
-
- locIfResets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 17 }
-
- locIfRestarts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 109]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS mandatory
- ::= { lifEntry 18 }
-
- locIfKeep OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 19 }
-
- locIfReason OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lifEntry 20 }
- -- the Local IP group
-
- -- the Local IP Address table
-
- lipAddrTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LIpAddrEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lip 1 }
-
- lipAddrEntry OBJECT-TYPE
- SYNTAX LIpAddrEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrTable 1 }
-
- LIpAddrEntry ::= SEQUENCE {
- locIPHow
- OCTET STRING,
- locIPWho
- NetworkAddress,
- locIPHelper
- NetworkAddress,
- locIPSecurity
- INTEGER,
- locIPRedirects
- INTEGER,
- locIPUnreach
- INTEGER,
- }
-
-
-
-
-
-
- cisco MIB [Page 110]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- locIPHow OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 1 }
-
- locIPWho OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 2 }
-
- locIPHelper OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 3 }
-
- locIPSecurity OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 4 }
-
- locIPRedirects OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 5 }
-
- locIPUnreach OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipAddrEntry 6 }
-
- -- theLocal IP Routing table
-
- lipRoutingTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LIpRouteEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lip 2 }
-
- lipRouteEntry OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 111]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX LIpRouteEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lipRoutingTable 1 }
-
- LIpRouteEntry ::= SEQUENCE {
- locRtMask
- NetworkAddress,
- locRtCount
- INTEGER,
- locRtUses
- INTEGER,
- }
-
- locRtMask OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lipRouteEntry 1 }
-
- locRtCount OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipRouteEntry 2 }
-
- locRtUses OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipRouteEntry 3 }
-
- routeFilter OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lip 3 }
-
- actThresh OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lip 4 }
-
- actLostPkts OBJECT-TYPE
-
-
-
-
-
- cisco MIB [Page 112]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lip 5 }
-
- actLostByts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lip 6 }
-
- -- the Local IP Accounting table
-
- lipAccountingTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LIpAccountEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lip 7 }
-
- lipAccountEntry OBJECT-TYPE
- SYNTAX LIpAccountEntry
- ACCESS read-only
- STATUS mandatory
- ::= { lipAccountingTable 1 }
-
- LIpAccountEntry ::= SEQUENCE {
- actSrc
- NetworkAddress,
- actDst
- NetworkAddress,
- actPkts
- INTEGER,
- actByts
- INTEGER,
- }
-
- actSrc OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS mandatory
- ::= { lipAccountEntry 1 }
-
- actDst OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 113]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS mandatory
- ::= { lipAccountEntry 2 }
-
- actPkts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipAccountEntry 3 }
-
- actByts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { lipAccountEntry 4 }
- -- the Local TCP group
-
- -- the Local TCP Connection table
-
- ltcpConnTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LTcpConnEntry
- ACCESS read-only
- STATUS mandatory
- ::= { ltcp 1 }
-
- ltcpConnEntry OBJECT-TYPE
- SYNTAX LTcpConnEntry
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnTable 1 }
-
- LTcpConnEntry ::= SEQUENCE {
- loctcpConnInBytes
- INTEGER,
- loctcpConnOutBytes
- INTEGER,
- loctcpConnInPkts
- INTEGER,
- loctcpConnOutPkts
- INTEGER,
- loctcpConnElapsed
- TimeTicks,
- }
-
- loctcpConnInBytes OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
-
-
- cisco MIB [Page 114]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnEntry 1 }
-
- loctcpConnOutBytes OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnEntry 2 }
-
- loctcpConnInPkts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnEntry 3 }
-
- loctcpConnOutPkts OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnEntry 4 }
-
- loctcpConnElapsed OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- ::= { ltcpConnEntry 5 }
- -- the Local Terminal Server group
-
- tsLines OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { lts 1 }
-
- -- the Local Terminal Server Line table
-
- ltsLineTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LTsLineEntry
- ACCESS read-only
- STATUS optional
- ::= { lts 2 }
-
- ltsLineEntry OBJECT-TYPE
- SYNTAX LTsLineEntry
-
-
-
-
-
- cisco MIB [Page 115]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS optional
- ::= { ltsLineTable 1 }
-
- LTsLineEntry ::= SEQUENCE {
- tsLineActive
- INTEGER,
- tsLineType
- INTEGER,
- tsLineAutobaud
- INTEGER,
- tsLineSpeedin
- INTEGER,
- tsLineSpeedout
- INTEGER,
- tsLineFlow
- INTEGER,
- tsLineModem
- INTEGER,
- tsLineLoc
- OCTET STRING,
- tsLineTerm
- OCTET STRING,
- tsLineScrlen
- INTEGER,
- tsLineScrwid
- INTEGER,
- tsLineEsc
- OCTET STRING,
- tsLineTmo
- INTEGER,
- tsLineSestmo
- INTEGER,
- tsLineRotary
- INTEGER,
- tsLineUses
- INTEGER,
- tsLineNses
- INTEGER,
- tsLineUser
- OCTET STRING,
- }
-
- tsLineActive OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
-
-
- cisco MIB [Page 116]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 1 }
-
- tsLineType OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- console(2),
- terminal(3),
- line-printer(4),
- virtual-terminal(5),
- auxiliary(6)
- }
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 2 }
-
- tsLineAutobaud OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 3 }
-
- tsLineSpeedin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 4 }
-
- tsLineSpeedout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 5 }
-
- tsLineFlow OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- none(2),
- software-input(3),
- software-output(4),
- software-both(5),
- hardware-input(6),
- hardware-output(7),
- hardware-both(8)
-
-
-
-
-
- cisco MIB [Page 117]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- }
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 6 }
-
- tsLineModem OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- none(2),
- call-in(3),
- call-out(4),
- cts-required(5),
- rs-is-cd(6)
- }
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 7 }
-
- tsLineLoc OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 8 }
-
- tsLineTerm OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 9 }
-
- tsLineScrlen OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 10 }
-
- tsLineScrwid OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 11 }
-
- tsLineEsc OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 118]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS optional
- ::= { ltsLineEntry 12 }
-
- tsLineTmo OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 13 }
-
- tsLineSestmo OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 14 }
-
- tsLineRotary OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 15 }
-
- tsLineUses OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 16 }
-
- tsLineNses OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 17 }
-
- tsLineUser OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS optional
- ::= { ltsLineEntry 18 }
-
- -- the Local Terminal Server Line Session table
-
- ltsLineSessionTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LTsLineSessionEntry
- ACCESS read-only
- STATUS optional
-
-
-
-
-
- cisco MIB [Page 119]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ::= { lts 3 }
-
- ltsLineSessionEntry OBJECT-TYPE
- SYNTAX LTsLineSessionEntry
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionTable 1 }
-
- LTsLineSessionEntry ::= SEQUENCE {
- tslineSesType
- INTEGER,
- tslineSesDir
- INTEGER,
- tslineSesAddr
- NetworkAddress,
- tslineSesName
- OCTET STRING,
- tslineSesCur
- INTEGER,
- tslineSesIdle
- INTEGER,
- }
-
- tslineSesType OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- pad(2),
- stream(3),
- rlogin(4),
- telnet(5)
- }
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 1 }
-
- tslineSesDir OBJECT-TYPE
- SYNTAX INTEGER {
- unknown(1),
- incoming(2),
- outgoing(3)
- }
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 2 }
-
-
-
-
-
-
- cisco MIB [Page 120]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- tslineSesAddr OBJECT-TYPE
- SYNTAX NetworkAddress
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 3 }
-
- tslineSesName OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 4 }
-
- tslineSesCur OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 5 }
-
- tslineSesIdle OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS optional
- ::= { ltsLineSessionEntry 6 }
- -- the Temporary DECNET group
-
- dnForward OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 1 }
-
- dnReceived OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 2 }
-
- dnFormaterr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 3 }
-
- dnNotgateway OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
-
-
- cisco MIB [Page 121]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS experimental
- ::= { decnet 4 }
-
- dnNotimp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 5 }
-
- dnHellos OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 6 }
-
- dnBadhello OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 7 }
-
- dnNotlong OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 8 }
-
- dnDatas OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 9 }
-
- dnBigaddr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 10 }
-
- dnNoroute OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 11 }
-
-
-
-
-
- cisco MIB [Page 122]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- dnNoencap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 12 }
-
- dnLevel1s OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 13 }
-
- dnBadlevel1 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 14 }
-
- dnToomanyhops OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 15 }
-
- dnHellosent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 16 }
-
- dnLevel1sent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 17 }
-
- dnNomemory OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 18 }
-
- dnOtherhello OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 123]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS experimental
- ::= { decnet 19 }
-
- dnOtherlevel1 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 20 }
-
- dnLevel2s OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 21 }
-
- dnLevel2sent OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 22 }
-
- dnNovector OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 23 }
-
- dnOtherlevel2 OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 24 }
-
- dnNoaccess OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { decnet 25 }
- -- the Temporary XNS group
-
- xnsInput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 1 }
-
-
-
-
-
- cisco MIB [Page 124]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- xnsLocal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 2 }
-
- xnsBcastin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 3 }
-
- xnsForward OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 4 }
-
- xnsBcastout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 5 }
-
- xnsErrin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 6 }
-
- xnsErrout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 7 }
-
- xnsFormerr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 8 }
-
- xnsChksum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 125]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS experimental
- ::= { xns 9 }
-
- xnsNotgate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 10 }
-
- xnsHopcnt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 11 }
-
- xnsNoroute OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 12 }
-
- xnsNoencap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 13 }
-
- xnsOutput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 14 }
-
- xnsInmult OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 15 }
-
- xnsUnknown OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 16 }
-
-
-
-
-
-
- cisco MIB [Page 126]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- xnsFwdbrd OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 17 }
-
- xnsEchoreqin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 18 }
-
- xnsEchoreqout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 19 }
-
- xnsEchorepin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 20 }
-
- xnsEchorepout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { xns 21 }
- -- the Temporary AppleTalk group
-
- atInput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 1 }
-
- atLocal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 2 }
-
- atBcastin OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
-
-
- cisco MIB [Page 127]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 3 }
-
- atForward OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 4 }
-
- atBcastout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 5 }
-
- atFormerr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 6 }
-
- atChksum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 7 }
-
- atNotgate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 8 }
-
- atHopcnt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 9 }
-
- atNoaccess OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 10 }
-
-
-
-
-
- cisco MIB [Page 128]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- atNoroute OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 11 }
-
- atNoencap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 12 }
-
- atOutput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 13 }
-
- atInmult OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 14 }
-
- atRtmpin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 15 }
-
- atRtmpout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 16 }
-
- atNbpin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 17 }
-
- atNbpout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 129]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS experimental
- ::= { appletalk 18 }
-
- atAtp OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 19 }
-
- atZipin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 20 }
-
- atZipout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 21 }
-
- atEcho OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 22 }
-
- atEchoill OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 23 }
-
- atDdpshort OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 24 }
-
- atDdplong OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 25 }
-
-
-
-
-
-
- cisco MIB [Page 130]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- atDdpbad OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 26 }
-
- atNobuffer OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 27 }
-
- atArpreq OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 28 }
-
- atArpreply OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 29 }
-
- atArpprobe OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 30 }
-
- atUnknown OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { appletalk 31 }
- -- the Temporary Novell group
-
- novellInput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 1 }
-
- novellBcastin OBJECT-TYPE
- SYNTAX INTEGER
-
-
-
-
-
- cisco MIB [Page 131]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- ACCESS read-only
- STATUS experimental
- ::= { novell 2 }
-
- novellForward OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 3 }
-
- novellBcastout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 4 }
-
- novellFormerr OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 5 }
-
- novellChksum OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 6 }
-
- novellHopcnt OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 7 }
-
- novellNoroute OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 8 }
-
- novellNoencap OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 9 }
-
-
-
-
-
- cisco MIB [Page 132]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- novellOutput OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 10 }
-
- novellInmult OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 11 }
-
- novellLocal OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 12 }
-
- novellUnknown OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 13 }
-
- novellSapreqin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 14 }
-
- novellSapresin OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 15 }
-
- novellSapout OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS experimental
- ::= { novell 16 }
-
- novellSapreply OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
-
-
-
-
-
- cisco MIB [Page 133]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- STATUS experimental
- ::= { novell 17 }
-
- END
-
- 5. Identification of OBJECT instances for use with the SNMP
-
-
- To be written.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- cisco MIB [Page 134]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- 6. References
-
- [1] V. Cerf, IAB Recommendations for the Development of
- Internet Network Management Standards. Internet Working
- Group Request for Comments 1052. Network Information
- Center, SRI International, Menlo Park, California,
- (April, 1988).
-
- [2] M.T. Rose and K. McCloghrie, Structure and Identification
- of Management Information for TCP/IP-based internets,
- Internet Working Group Request for Comments 1065.
- Network Information Center, SRI International, Menlo
- Park, California, (August, 1988).
-
- [3] K. McCloghrie and M.T. Rose, Management Information Base
- for Network Management of TCP/IP-based internets,
- Internet Working Group Request for Comments 1066.
- Network Information Center, SRI International, Menlo
- Park, California, (August, 1988).
-
- [4] V. Cerf, Report of the Second Ad Hoc Network Management
- Review Group, Internet Working Group Request for Comments
- 1109. Network Information Center, SRI International,
- Menlo Park, California, (August, 1989).
-
- [5] J.D. Case, M.S. Fedor, M.L. Schoffstall, and J.R. Davin,
- Simple Network Management Protocol, Internet Working
- Group Request for Comments 1098. Network Information
- Center, SRI International, Menlo Park, California,
- (April, 1989).
-
- [7] Information processing systems - Open Systems
- Interconnection - Specification of Abstract Syntax
- Notation One (ASN.1), International Organization for
- Standardization. International Standard 8824, (December,
- 1987).
-
- [8] Information processing systems - Open Systems
- Interconnection - Specification of Basic Encoding Rules
- for Abstract Notation One (ASN.1), International
- Organization for Standardization. International Standard
- 8825, (December, 1987).
-
-
-
-
-
-
-
-
- cisco MIB [Page 135]
-
-
-
-
-
-
- Request for Comments: Draft cisco Systems, Inc.
-
-
- Table of Contents
-
-
- 1 Introduction .......................................... 1
- 2 Objects ............................................... 1
- 2.1 Object Groupings .................................... 1
- 2.2 Format of Definitions ............................... 2
- 3 Object Definitions .................................... 3
- 3.1 Product Section ..................................... 4
- 3.2 Local Variable Section .............................. 4
- 3.2.1 Local System Group ................................ 5
- 3.2.2 Local Interface Group ............................. 25
- 3.2.2.1 Local Interface Table ........................... 25
- 3.2.3 Local IP Group .................................... 34
- 3.2.3.1 Local IP Address Table .......................... 34
- 3.2.3.2 Local IP Routing Table .......................... 38
- 3.2.3.3 Local IP Accounting Table ....................... 42
- 3.2.4 Local TCP Group ................................... 44
- 3.2.4.1 Local TCP Connection Table ...................... 44
- 3.2.5 Local cisco Terminal Server Group ................. 47
- 3.2.5.1 Local Terminal Server Line Table ................ 48
- 3.2.5.2 Local Terminal Server Line Session Table ........ 57
- 3.3 Temporary Variable Section .......................... 61
- 3.3.1 Temporary DECNET Section .......................... 61
- 3.3.2 Temporary XNS Section ............................. 71
- 3.3.3 Temporary AppleTalk Section ....................... 79
- 3.3.4 Temporary Novell Section .......................... 91
- 4 Definitions ........................................... 98
- 5 Identification of OBJECT instances for use with the
- SNMP ............................................... 134
- 6 References ............................................ 135
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- cisco MIB [Page 136]
-
-
-